INCH-POUND
MIL-DTL-52849E
15 April 2008
SUPERSEDING
MIL-PRF-52849D
1 August 1998
DETAIL SPECIFICATION
TEST KIT - AVIATION FUEL CONTAMINATION (PORTABLE)
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers a portable aviation fuel contamination test kit that
is used to perform ASTM International and ISO procedures to determine fuel quality.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of documents cited in sections 3, 4 or 5 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
A-A-58092
Tape, Antiseize, Polytetrafluorethylene
Comments, suggestions, or questions on this document should be addressed to: U.S. Army
Tank-automotive and Armaments Command, ATTN: AMSRD-TAR-E/CM/DM/STND MS#268,
6501 E. 11 Mile Road, Warren, MI 48397-5000 or emailed to
DAMI_STANDARDIZATION@conus.army.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6630
Distribution Statement A. Approved for public release, distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business