MIL-D-537F
4.4 Quality conformance inspection.
4.4.1 Sampling. Sampling for examination and thermal shock shall be in accordance with
MIL-STD-105, table I and columns 1 and 2 of table II-A. Inspection levels shall be level II for
examination and S-2 for thermal shock.
4.4.2 Examination. Samples selected in accordance with 4.4.1 shall be examined as specified
in 4.5.1. Acceptance number shall be zero for both major and minor defects. No defects shall be
allowed.
4.4.3 Tests.
4.4.3.1 Individual. The colored glass standards of each disk shall be subjected to the tests
marked "X" in column 2 of table IV. Failure of any test shall be cause for rejection.
4.4.3.2 Samples. Samples selected in accordance with 4.4.1 shall be subjected to the tests
marked "X" in column 3 of table IV. Quality conformance testing shall be performed in
accordance with 4.5.2.1, 4.5.2.3 and 4.5.2.7. Sampling shall be in accordance with MIL-STD-
105, table I and columns 1 and 2 of table II-A. Inspection level shall be S-2 and acceptance
number shall be zero. No defects shall be allowed.
4.5 Inspection.
4.5.1 Examination. The disks shall be examined for the following defects:
Requirement
Number
Defects
paragraph
Major
101.
Material not as specified.
3.3
102.
Materials not resistant to corrosion and deterioration or
3.3.1
treated to be made resistant to corrosion and deterioration.
103.
Material and material finish or treatment information not
3.3.2
available.
104.
Used components are incorporated in the disks.
3.3.3
105.
Circular inserts material not as specified.
3.3.4
106.
Circular inserts identifying the value of glass color standards
3.4.1
are not permanently located as specified.
107.
The glass filters are not located in the center of the disk as
3.4.2
specified.
108.
The glass color standard does not withstand thermal shock
3.4.2
when tested as specified.
109.
The glass color standards and filters are not free of cracks,
3.4.2
scratches, bubbles, blisters, and nonuniformity of colors as
specified.
110.
Workmanship not as specified.
3.9
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business